Mold has been a subject of discussion for the last couple of years because of its (previously lesser known) adverse effects on one’s health. Mold is one of those silent yet potentially deadly things that lurk in many corners of your home and wait for the perfect moment to strike.

Given that mold can turn into a potentially dangerous predicament, it’s crucial for you to develop a remediation plan and deal with the issue before it turns into a large-scale problem.
We’ve covered a couple of steps for mold remediation in this article so that you don’t have to spend time on too much research. The sooner you decide to tackle the problem, the easier it will be to solve and prevent potential issues.

Mold Remediation Key Steps

The following steps of complete mold remediation are not hard-written rules, but rather a list of useful guidelines you should keep in mind when dealing with this pesky nuisance. Feel free to adapt these tips and tricks to match and fit your situation.

Understand the Cause

Many people struggle to cope with their battle against mold because they don’t have the required knowledge about its growth process, adverse effects, and origin. The sooner you learn the basics of mold growth and its tight connection with moisture, the sooner you’ll resolve or even prevent the issue.

The important thing you should remember is that behind all issues with mold lies a problem with moisture or water. In simpler terms, when there is moisture, there is definitely potential for mold growth. Naturally, the best course of action is to understand and identify the problem, so that you can act accordingly and solve it in a timely manner.

Once Identified it has to be Contained

Proper containment is crucial for the success of your endeavor. It doesn’t matter how successful you are in identifying the issue if you cannot deal with it properly. The best way to deal with this is to hire a professional who is an expert and who knows exactly what they are doing. Even though mold seems like a pretty straightforward and simple problem, there’s much more to it than meets the eye.

An experienced professional will probably use negative air chambers to isolate the mold and prevent it from spreading once the cleanup process starts. On top of that, most professionals will ask you to turn off any HVAC systems in the house to prevent spores from spreading.

identifying mold

Mold Remediation Plan

Once the affected areas are contained, it’s time to either kill mold spores or completely remove things that cannot be adequately cleaned. For example, carpets and drywall are porous materials that are quite hard to clean once they are already contaminated. In most cases, a professional will advise you to remove them completely rather than clean them numerous times with little to no success.

Non-porous materials like bathroom tiles, countertops, and sinks will most likely be treated with a biocide to kill mold spores. Luckily, these materials are relatively easy to deal with, and the applied solutions won’t cause any damage whatsoever.

Some people will try to treat porous materials with antimicrobial solutions, but that isn’t as effective as replacing the aforementioned materials.

Cleanup and Inspection

Even though it doesn’t seem like it, this particular step is probably one of the most important mold remediation steps on our list. Many people manage to fight their way through and come to this particular stage only to fail miserably because of sheer neglect. In other words, inspection is a process that must be done immaculately or else all the previous steps were in vain.

In order to be sure that your cleanup was successful, you should focus on the following:

  • Make sure there aren’t any visible traces of mold
  • Verify that there aren’t any proceeding moisture problems and signs of recurring water damage
  • Inspect your home on a regular basis (a couple of times a year)

Cleanup is an immediate process, and it’s only effective if you start thinking about prevention in the future. Therefore, cleanup is a success as long as you stay vigilant and pay attention in the future, especially when it comes to quarantining and isolating potential mold growth.

Prevention and Other Useful Tips

While this isn’t a mold remediation process per se, it’s still useful and important for people who are dealing with mold and want to put an end to it as soon as possible.

As we have mentioned, mold thrives in moist environments. Therefore, the first thing you should be thinking of is whether your home is fertile ground for mold. In case you’re using an air conditioner to lower the temperature inside your home, it’s probably a good idea to go ahead and inspect both walls and corners in that particular room or environment. HVAC units and systems are known to be quite susceptible to spreading and growing mold. Bear in mind; it’s always better to hire a professional and let them deal with the issue properly rather than doing it yourself.

Proper ventilation is also one of the crucial mold remediation process steps. Ventilation prevents condensation, which is one of the conditions for mold growth. As you can imagine, bathrooms are usually the most susceptible place for mold growth due to condensation. Luckily, the only thing you need to do in order to prevent condensation is to ventilate the area and neutralize the moisture.

While many people are initially against the idea, investing in moisture meters and placing them on focal (and most vulnerable) points is a great idea. It is true that it will cost a bit of money, but it’s a far cheaper investment than hiring a professional to deal with an already contaminated area. Bear in mind; prevention is always more affordable than intervention.

The Conclusion

Mold should not be taken lightly. While it seems like a pretty harmless thing that’s more of a nuisance than a threat, it’s definitely something you should closely monitor and prevent if possible. It can cause serious health issues and even death in some occasions, which is more than a strong reason to take things seriously when it comes to dealing with mold.

In case you’re not sure whether to hire a professional or tackle the predicament yourself, it’s probably a better idea to hire a company and let them deal with the issue properly. On the other hand, it all depends on the gravity of the problem. For example, if it’s just a single wall or a relatively small area, you can probably deal with it yourself, as long as you understand the cause, effect, and know how to enforce the necessary measures effectively.

If you’re interested in reading and knowing more about mold and other potentially dangerous things in your home, read our other articles!

Skip to content