Carpet mold is a pretty annoying nuisance because it can produce unpleasant smells, damage your carpet, and sometimes even cause health issues if it’s left untreated for long periods of time. Removing mold from carpet is not as complicated as it might seem, but it must be done properly or else the whole endeavor is in vain.

If you’re struggling with carpet mold and are trying to figure out the best way to remove mold, take a moment and check out some of the methods we’ve covered in this article.

How To Get Mold Out of Carpet Naturally

If you’re fighting against mold and are running into issues, here are some of the most popular methods you can resort to in times of trouble:

  • Getting Mold out of Carpet with Home Supplies

This particular method is the easiest to execute, and it’s the most affordable one on our list.

The first thing you should do is to inspect the carpet and assess the damage. If the mold has reached the back side of the carpet, it’s probably a good idea to consider hiring a professional at that point as it would take significant effort to remove mold when it reaches the back side.

In case the mold did not reach the back side, you should take your carpet outside and hang it over a sturdy clothesline. Keep it exposed to direct sunlight for at least 24 hours, or even 48 hours, depending on the severity of your problem.

drying carpet outside

If your carpet is not removable and you’re unable to take it outside, sprinkle the affected area with baking soda and leave it overnight. This will remove both the moisture and unpleasant odors. Vacuum up the baking soda the next day and the area should be completely dry.

The most effective home remedy for mold is vinegar. It’s well-known that vinegar does a great job of killing mold while being pretty affordable and easy to obtain. Apply the vinegar with a spray bottle and scrub the area with a stiff brush. Once you’re done scrubbing, blow dry the carpet, and that’s it!

  • How To Get Mold Out of Carpet With Commercial Treatments

Anti-mold sprays are widely available nowadays and aren’t as expensive as one might expect. The most important thing you should keep in mind is to check the label of the product and see whether it’s safe for use on carpets. Many commercial solutions contain chemicals that may cause damage to your carpet, so make sure to check that first.

If your carpet is constantly exposed to humid conditions, look for products that include a mold barrier treatment as it is foreseen to prevent further growth.

In case you aren’t keen on buying commercial treatments, mixing bleach and water is a good alternative. Mix half a cup of bleach with a gallon of water and apply the solution to the affected area. Let it sit for a few minutes and use a stiff brush to scrub the residue.

If you can’t find an answer to the question of how to get mold smell out of carpet, your best bet is to use vinegar, baking soda, or bleach.

The Conclusion

While it’s not hard to figure out how to clean mold from carpet, it’s definitely something you should be careful about, especially if you’re planning on using strong chemicals and commercial treatments. However, as long as you follow a simple set of safety rules, you should be fine.

Hopefully, this article has helped you find good ways to fight against this nuisance and has helped you find an answer to the question of how to get rid of mold in carpet.

If you’re interested in reading more about this and similar subjects, read our other articles!

Skip to content